產品概述 Product overview

歐式電纜分接箱是近年來廣泛用于電力配網系統中的電纜化工程設備，它的主要特點是雙向開門、利用對接套管作為連接母排，具有長度小、電纜排列清楚、三芯電纜不需大跨度交叉等明顯優點。其所采用的電纜接頭符合 DIN47636 標準。

一般采用額定電流 630A 螺栓固定連接式電纜接頭。

European-style cable tap box is widely used in cable engineering equipment in power distribution network system in recent years. Its main features are bidirectional door opening, using butt-joint sleeve as connecting busbar, and it has obvious advantages such as small length, clear cable arrangement, no need for large span crossing of three-core cables, etc. The cable joints adopted conform to DIN47636 standard.

Generally, the rated current 630A bolt is used to fix the connected cable connector.

正常使用環境 Normal operating environment

環境溫度：氣溫：+40℃，低氣溫 -30℃

風速：相當 34m/s（不大于 700Pa）

濕度：日相對濕度平均值不大于 95% ，月相對濕度平均值不大于 90%

防震：水平加速度不大于 0.4m/s2

 ，垂直加速度不大于 0.1 5m/s2

安裝地點傾斜度：不大于 3°

安裝環境：周圍空氣應不受腐蝕性、可燃性氣體、水蒸氣等明顯污染，安裝地點無劇烈震動。

訂購本產品超出上述條件規定時，請與本公司協商。

Ambient temperature: maximum temperature: +40℃ , minimum temperature -30℃

Wind speed: equivalent to 34m/s (not more than 700Pa)

Humidity: the average daily relative humidity is not more than 95%, and the average monthly relative humidity is not more than 90%

Earthquake prevention: horizontal acceleration is not more than 0.4m/s2

, vertical acceleration is not more than 0.1 5m/s2

Inclination of installation site: no more than 3°

Installation environment: ambient air shall be free from obvious pollution such as corrosiveness, combustible gas and water vapor, and the installation 

site shall be free from violent vibration.

Please consult with our company when ordering this product beyond the above conditions.